Schmid Watson Specifications Page 56

  • Download
  • Add to my manuals
  • Print
  • Page
    / 103
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 55
Watson 5 Ethernet
Operating Manual
W5-Ethernet-Manual.doc
Version 2.0-01
7-2 Revision: 2006-04-27
CARDMODE [ mode ]
The Watson 5 Ethernet plugin can be configured flexibly to support 1/2/4 pair operation. This is
done with the CARDMODE command. Entering CARDMODE without any parameter will display the
current plugin mode:
LTU_01_CM> CARDMODE
Current cardmode: 4x1 pair (mode 1)
Bridge Port Wire Pair
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DSL1 <-------------> a1a2
DSL2 <-------------> b1b2
DSL3 <-------------> c1c2
DSL4 <-------------> d1d2
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Available modes:
1
4x1p, four independent 1-pair systems
2
2x2p, two independent 1-pair systems
3
1x2p + 2x1p, one 2-pair and two 1-pair systems
4
1x4p, one 4-pair system
Table 7-1 : CARDMODEs
When changing the cardmode, the newly configured DSL links will be reset and their configuration
set to the default configuration of the new mode as defined in Table 7-2. Note that only the DSL de-
faults are set, the Ethernet interface configuration is not changed by CARDMODE. For security
reasons, the command must be confirmed.
Note This command is not available on the Watson 5 Ethernet tabletop modem.
DEFAULT (Plugin)
The DEFAULT command sets a default configuration. The following default settings are available
on the plugin:
Parameter
DEFAULT 0 DEFAULT 1 DEFAULT 2
SHDSL
Master/Slave Master Master Master
Autorestart Enabled Enabled Enabled
Power Backoff Enabled Enabled Enabled
Linerate per span 8'192 kbit/s 4'096 kbit/s 2'048 kbit/s
Operating Mode 1 x 4 Pair 2 x 2 Pair 4 x 1 Pair
DSL Sync rate per pair 2'056 kbit/s 2'056 kbit/s 2'056 kbit/s
Ethernet
Interface mode Auto Auto Auto
Flow control Auto Auto Auto
VLAN Settings
Bridgemode 1 (VLAN Bridging) 1 (VLAN Bridging) 1 (VLAN Bridging)
VLANs VLAN 1 ETH1, DSL1 VLAN 1 ETH1
DSL1
VLAN 2 ETH3
DSL3
VLAN 1 ETH1 DSL1
VLAN 2 ETH2 DSL2
VLAN 3 ETH3 DSL3
VLAN 4 ETH4 DSL4
Table 7-2: DEFAULT values
Page view 55
1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 102 103

Comments to this Manuals

No comments