Watson 5 Ethernet
Operating Manual
W5-Ethernet-Manual.doc
Version 2.0-01
10-2 Revision: 2006-04-27
On the Watson 5 Ethernet tabletop modem the pin assignment is as follows:
Pin Signal Description
1 NC -
2 Shield DSL cable shield (optional)
3 b1 Wire pair b, tip
4 a1 Wire pair a, tip
5 a2 Wire pair a, ring
6 b2 Wire pair b, ring
7 Shield DSL cable shield (optional)
8 NC -
Table 10-2: DSL connector pin assignment (Tabletop)
Pins 2 and 7 of the tabletop are connected to Functional Protective Earth (FPE). They can be used
to connect the shield of the DSL cable or can be left open.
10.1.2 DSL Cable
SZ.378.0M0.V21: HDSL Cable, 4 pairs, 5m, open end
Figure 10-2: HDSL Cable, 4 pairs, 5m, open end
Comments to this Manuals