Schmid Watson Specifications download pdf (Page 5)

Revision: 2006-04-27

Important Safety Precautions

To reduce the risk of fire, bodily injury, and damage to the equipment, observe the following precau-

tions:

! Read and follow all warning notices and instructions marked on the product or included in the

manual.

! This product is to be used with telecommunications circuits. Take the following precautions:

- Never install telephone wiring during a lightning storm.

- Never install telephone jacks in wet locations unless the jack is specifically designed for

wet locations.

- Never touch uninsulated telephone wires or terminals unless the telephone line has been

disconnected at the network interface.

- Use caution when installing or modifying telephone lines.

- Avoid using a telephone (other than a cordless type) during an electrical storm. There may

be a remote risk of electric shock from lightning.

- Do not use the telephone to report a gas leak in the vicinity of the leak.

! Condensation may occur externally or internally if this product is moved from a colder room to

a warmer room. When moving this product under such conditions, allow ample time for this

product to reach room temperature and to dry before operating.

! This product is intended for use in environments as stated in the technical specifications. Do

not use this product in areas classified as hazardous locations. Such areas include patient care

areas of medical and dental facilities, oxygen-laden environments, or industrial facilities. Con-

tact your local electrical authority governing building construction, maintenance, or safety for

more information regarding the installation of this product.

! Slots and openings in this product are provided for ventilation and should never be blocked or

covered, since these ensure reliable operation of this product and protect it from overheating.

This product should not be placed in a built-in apparatus such as a rack unless the apparatus

has been specifically designed to accommodate the product, proper ventilation is provided for

the product, and the product instructions have been followed.

! This product should be placed away from radiators, heat registers, stoves, or other pieces of

equipment that produce heat. Allow sufficient air circulation around the product and the AC

adapter during use to ensure adequate cooling of the device.

! Do not use this product in a wet location.

! Normal operation of this product is only possible when the external housing is left in place.

! This product should be operated only from the type of power source indicated on the product's

electrical ratings label. If you have questions about the type of power source to use, contact

your local Schmid Distributor or local power company.

! Be sure that the power outlet you plug the power cord into is easily accessible and located as

close to the equipment operator as possible. When you need to disconnect power to this prod-

uct, be sure to unplug the power cord from the electrical outlet.

! Ensure that the voltage select switch, if provided on this product, is in the correct position for

the type of voltage in your country (115 VAC or 230 VAC).

! Do not allow anything to rest on any of the attached cables and do not position this product

where persons will walk or trip on the cables.

1 2 3 4 5 6 7 8 9 10 ... 102 103

Comments to this Manuals

No comments

Schmid Watson Specifications Page 5

Comments to this Manuals

Related products and manuals for Networking Schmid Watson