Schmid Watson Specifications Page 29

  • Download
  • Add to my manuals
  • Print
  • Page
    / 49
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 28
Watson-SHDSL-Router-Manual.doc
Version 1.1-07
Watson SHDSL Router
Operating Manual
Revision: 2012-02-15
=
3-9
3.4.1 Traffic Priority
Traffic Priority allows managing and avoiding traffic congestion by defining in-
bound and outbound priority rules. These rules determine the priority that pack-
ets, traveling through the router, will receive. QoS parameters (DSCP marking
and packet priority) are set per packet, on an application basis.
QoS parameters can be set using flexible rules, according to the following pa-
rameters:
Source/destination IP address,
MAC address or host name
Source/destination ports
VLAN ID (S-VLAN and/or C-VLAN)
VLAN priority (802.1p)
DSCP value
Two priority marking methods for packet prioritization are available:
DSCP
802.1p Priority
The matching of packets by rules is connection-based, known as Stateful Packet
Inspection (SPI), using the same connection-tracking mechanism used by the
firewall. Once a packet matches a rule, all subsequent packets with the same at-
tributes receive the same QoS parameters, both inbound and outbound.
3.4.2 Traffic Shaping
Traffic Shaping is the solution for managing and avoiding congestion where a
high speed LAN meets limited broadband bandwidth. A traffic shaper is essen-
tially a regulated queue that accepts uneven and/or bursty flows of packets and
transmits them in a steady, predictable stream so that the network is not over-
whelmed with traffic.
While Traffic Priority allows basic prioritization of packets, Traffic Shaping pro-
vides more sophisticated definitions. Such are:
Bandwidth limit for each interface
Bandwidth limit for classes of rules
Prioritization policy
TCP serialization
3.4.3 Differentiated Services Code Point (DSCP)
Differentiated Services (DiffServ) is a Class of Service (CoS) model that enhanc-
es best-effort Internet services by differentiating traffic by users, service require-
ments and other criteria. Packets are specifically marked, allowing network
nodes to provide different levels of service, as appropriate for voice calls, video
playback or other delay-sensitive applications, via priority queuing or bandwidth
allocation, or by choosing dedicated routes for specific traffic flows.
Page view 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 48 49

Comments to this Manuals

No comments